OOPS, FORGOT

(no name) ((no email))
Thu, 15 Sep 94 15:00:02

This is an addendum to my previous posting that has the diagram of the
power supply connector for the ultralite. The 15.6 volts on pin 2
**MUST** be current limited! The charging current should be about 50 milliamps.
Use a resistor of about 100 ohms in series
with this pin if you are building a power supply. This is the juice
that charges the internal battery, if it is too high a current, well
Who really knows what might happen, but chances are it won't be pleasant!

Frank